Are you struggling to find a leak in your pool liner?
When installed correctly, pool liners can last 10-15 years. You usually won’t have to worry about them for the first few years. After this, though, you’ll begin to notice some wear and tear.
How to find a leak in a pool liner can be difficult. view our service areas This post will give you the top steps to take when you see a pool liner leak. Doing so will help you never struggle to find leaks in your pool liner again.
Gather Your Tools
Before starting the process, ensure you have the tools and equipment to fix a pool. You’ll need a pair of goggles or a mask, a pool liner patch kit, food coloring or a dye tester, a dry-erase marker, and a pool brush.
Check the Water Level
Measure the water level in your pool. If it’s consistently dropping more than evaporation would account for (typically around 1/4 inch per day), there’s a good chance you have a leak.
Inspect the Pool Liner
Carefully examine the pool liner for any visible signs of damage. Look for tears, punctures, or areas where the liner may have pulled away from the pool walls or floor. Mark any suspicious areas with a dry-erase marker.
Turn Off Equipment
Turning off the pool equipment is an important step in finding a leak. With the pumps running, there is more water being displaced and circulated. This allows any areas where water is lost to be more easily identified.
Shutting off the pool equipment is the first step in locating a leak in a pool liner so you can begin making the necessary repairs.
Dilute some food coloring in a small water container or use a commercial dye tester for pool leak detection. Release a few drops of the dye near the suspected leak area. If the dye gets sucked into the liner, it indicates a leak in that spot.
Wait and Observe
Allow some time for the dye to work its way to the leak. This might take a few minutes. Be patient and watch closely for any dye movement towards the suspected area.
If the dye test doesn’t reveal the leak’s location, repeat the process in areas where you suspect the leak might be.
Consider diving underwater with your goggles or mask and inspecting the liner closely for more precise results. Look for any visible damage or signs of water escaping.
Patch the Leak
Once you’ve identified the area of the leaky pool, use a pool liner patch kit to seal it. Follow the manufacturer’s instructions carefully to ensure a secure and long-lasting repair. You can also view our service areas for pool repairs if you want to avoid the hassle of having to do this yourself.
Monitor the Water Level
When fixing a pool after patching the leak, monitor its water level for a few days to ensure it stabilizes. If it continues to drop, you may have missed another leak, and you’ll need to repeat the process.
Know How to Find a Leak in a Pool Liner
The location of a leak in a pool liner can be tricky, but following the key steps on how to find a leak in a pool liner can more easily find the source. Knowing the location of a liner leak can help inform the decision-making process of repairing or replacing the damaged liner, saving time and money in the long run.
If you still run into trouble, consider contacting a professional for help.
Remember to browse our site for more advice.